www.laboshop.com 6 7 5 4 2 3 1 1 FINOGEL DuplicatingMaterial Duplicating gel for the model casting technique. Suitable for all plaster-free investment materials, very good fitting accuracy. Repeatedly reusable. Advantages: • Volume-stable; • Precise impression; • Durable and low viscosity. Physical data: melting point 93 °C; casting temperature 52-54 °C; setting time 40 min. 6000 g each 140.016 blue transparent , 2FINOGEL PLUS DuplicatingMaterial High-quality agar-agar-based gel to produce precise investment material models. Also suitable for the investment of wax-ups in the resin casting technique. Advantages: • Elastic; • High firmness; • Reduced setting time; • Low shrinkage. Physical data: melting point 92 °C; casting temperature 45-46 °C; setting time 45 min. 6000 g each 140.026 green , 3FINOGEL I+P DuplicatingMaterial Agar-agar duplicating gel on the basis of sea algae. Suitable to produce plaster models or investment material models. Heating in customary duplicating units or simply in the microwave. Physical data: melting point 90 °C; casting temperature 45-50 °C; setting time 60 min. 6000 g each 140.031 colourless , 4Gebdi DuplicatingMaterial Environmentally friendly, on natural and high-quality algae basis. For dental plasters, plaster containing and phosphate-bonded investment materials as well as self-curing denture resins. Reusable. Physical data: melting point 93.5 °C; solidification point 40 °C; casting temperature 49 °C; setting time approx. 40-60 min. 6000 g each 180.126 green , 5FINO HARDENER Cold Immersion Hardener For edge-stable models made of investment material. Cold application. Penetrates easily into the surface of the duplicated models. 1000 ml each 143.082 , 6FINO BONDER AdhesiveModel Liquid Seals, smoothes and hardens surfaces of models made of plaster and investment material and generates a permanent and very thin adhesive layer. The adhesive layer reliably increases the adhesion of resin or wax patterns (also retention beads) to the lukewarm model. Cracks in the metal surfaces, on retentions or clasps do not develop. Layer thickness and adhesive force are controlled by multiple layering. 30 ml each 143.049 , 7Detax Model Spray Special varnish, smoothes and hardens model surfaces in casting techniques. Closes and seals plaster pores. Easy application by spraying, replaces immersion bath. 250 ml each 114.740 , www.laboshop.com
RkJQdWJsaXNoZXIy MTI3MDM=