www.laboshop.com 1 2 3 4 5 10 % more efficient than conventional silicones 1+2FINOSIL Duplicating Silicone Addition-curing. High precision, no shrinkage, fine surface texture and smooth, moisture-free surfaces as a result. Very elastic, low viscosity, no hardening required. Very easy processing either manually in the dosing bowl or with dosing dispenser or dosing unit. Physical data: mixing time manually 45 s; mixing time under vacuum approx. 30 s; processing time 6 ± 1 min; demoulding after 30 ± 5 min; mixing ratio A : B = 1 : 1; A = white, B = yellow. 1 FINOSIL 15 Final hardness 16 Shore A. components A and B 1 pack. 142.002 ml each , 142.016 ml each , Trial pack, 2 x 86 ml 1 pack. 142.00P6 , 2FINOSIL 22 Final hardness 22 ± 2 Shore A. components A and B 1 pack. 142.046 ml each , 142.052 ml each , 3FINOSIL KF 28 Duplicating Silicone Addition-curing. Outstanding properties for the duplicating technique without flasks. Combines the easy handling of a 1 : 1 silicone with the physical properties of a 1 : 9 silicone. A sleeve forms the duplicating mould. The silicone is mixed either manually or with a common 1 : 1 dosing unit. Advantages: • No influence on the setting expansion if duplicated with sleeves; • High tensile strength; • High final hardness of 28 Shore A. Physical data: mixing time manually 45 s; mixing time under vacuum approx. 30 s; processing time 6 min; demoulding after 35 min; final hardness 28 Shore A; mixing ratio A : B = 1 : 1; A = white; B = light blue. components A and B 1 pack. 141.911 ml each , 4+5FINOSIL PREMIUM Duplicating Silicone Addition-curing. Without additional fillers. At the same weight, it offers a higher volume than comparable materials and is thus very efficient. Low viscosity, excellent mechanical properties, no wetting agent required. Advantages: • Shrinkage-free because of platinum catalyst; • Very true to detail and dimension; • Very flexible with 100 % resetting force; • Easy to demould, especially with undercuts; • Very tear-resistant; • Application without flask possible. 4FINOSIL PREMIUM 22 Regular setting. Physical data: mixing time manually approx. 1 min; mixing time under vacuum 30-45 s; processing time 6 min; demoulding after 30 min; final hardness 22 Shore A; mixing ratio A : B = 1 : 1; A = transpa-white, B = blue. components A and B 1 pack. 142.079 ml each , 5FINOSIL PREMIUMF 22 Fast setting. Hardening time only 10 minutes. Physical data: mixing time manually approx. 1 min; mixing time under vacuum 30-45 s; processing time 2 min; demoulding after 10 min; final hardness 22 Shore A; mixing ratio A : B = 1 : 1; A = white, B = pink. components A and B 1 pack. 142.096 ml each , 142.129 ml each ,
RkJQdWJsaXNoZXIy MTI3MDM=