www.laboshop.com 1 2 3 4 9 10 12 14 13 11 5 6 7 8 1 FINODIE 0 Die Hardener Hardens and seals the die without forming a layer. Critical edges at the preparation margins are strengthened and mechanically more resistant. The surfaces are dirt- and water-repellent. Any formation of a layer is prevented by diffusion. For the optimal die preparation for covering with FINODIE die spacer. Layer thickness 0 µm. bottle with brush, 15 ml each 198.851 clear , 2-11 FINODIE Die Spacer Low viscosity, air-drying and very fastsetting. The die spacer is thixotropic when applied in thin layers and forms a uniform, homogeneous surface. FINODIE is available in opaque, good covering shades and can by applied in multiple layers for marking mar- contacts. Advantages: • Smooth and scratch-resistant surface; • No run off during application; • Resistant to steaming off; • Excellent adhesion to plaster bases; • Very hard and sturdy; • Solvent-resistant. FINODIE 3 Layer thickness 3 µm. Excellently suitable as basic varnish for additional die spacers. bottle with brush, 15 ml each 198.861 clear , FINODIE 10 Layer thickness 10 µm. Especially suitable for the all-ceramic technique. bottle with brush, 15 ml each 198.881 clear , 198.891 silver , 198.901 red , 198.911 gold , 198.921 dentine , 199.121 blue , FINODIE 15 Layer thickness 15 µm. bottle with brush, 15 ml each 198.941 silver , 198.951 red , FINODIE 20 Layer thickness 20 µm. For achieving a uniform distance layer with only one application. bottle with brush, 15 ml each 198.961 silver , 12FINODIE Thinner Compatible with all air-drying FINODIE die spacers. bottle with brush, 15 ml each 198.971 , 13FINODIE LC 10 Die Spacer Light-curing. For sealing of plaster dies and as a spacer for the fixation cement between crown and die. Also suitable for sealing and hardening the model base under a pontic as well as the antagonist. Layer thickness 10 µm. Advantages: • Scratch-resistant and steam-proof; • Hard and solid surface; • Adheres very well to plaster surfaces; • No thinner required; • Cures in all conventional light-curing units. bottle with brush, 20 ml each 198.521 transparent , 14FINODIE 20 Latex Varnish Can be pulled off. Spacer and separating agent for dies and contact areas. Can be used as spacer for the cement gap in the crown and bridge technique as well as for shrinkage compensation of metal-free restorations made of pressed all-ceramic, composite or ceramic. Also suitable as a spacer in the deep-drawing technique and for separating different materials. The opaque-white liquid is fast drying and creates a transparent layer of 20 µm. Advantages: • Universally applicable; • Easy to remove; • Reliable separating properties; • No influence on the shade. bottle with brush, 15 ml each 199.039 ,
RkJQdWJsaXNoZXIy MTI3MDM=