www.laboshop.com 3 1 2 You will find the Ivoclar Vivadent IvoBase Injector injection unit at www.laboshop.com 1+2 Ivoclar Vivadent IvoBase Denture Resin* PMMA-based self-curing resin in predosed capsules. Combines the qualityrelated advantages of a heat-curing resin with the processing advantages of a self-curing resin. For full, partial, combination, hybrid and implant prosthetics, relines, repairs. Material clear for occlusal splints and orthodontic plates. To be processed in the IvoBase Injector. Advantages: • Very low residual monomer contents; • High fitting accuracy and good suction capabilities of the dentures due to shrinkage compensation; • Outstanding bond to acrylic teeth due to pressure-heat polymerisation; • Basal surface shine for less gingival irritations; • No skin contact with monomer. 1 Hybrid For all removable prosthetic restorations. Polymerisation time of 35 minutes. Physical data: flexural strength 81 N/mm²; flexural modulus 2700 N/mm²; content of residual monomer 1.4 %, with reduction 0.7 %; water absorption 22.8 µg/mm³; solubility < 0.1 µg/mm³. Composition powder in %: polymethyl methacrylate 95.5; plasticizer 3.8; initiator 0.6; pigments 0.1. Composition liquid in %: methyl methacrylate 95.9; dimethacrylate (linker) 4.0; catalyst 0.1. Hybrid kit 20: 20 pre-dosed capsules; 22 funnels; 22 pre-formed wax patterns; 22 ventilation filters; 60 ml Separating Fluid alginate separating agent and 1 spatula. 1 set 021.202 pink , 021.212 pink-V , 021.222 pink-V Implant , 021.232 preference , 021.242 preference Implant , 021.252 clear , 2High Impact Very impact- and break-resistant material. For constructions subject to high stress. Polymerisation time of 50 minutes. Physical data: flexural strength 74 N/mm²; flexural modulus 2360 N/mm²; content of residual monomer 1.3 %, with reduction 0.7 %; water absorption 21.6 µg/mm³; solubility < 0.1 µg/mm³; fracture toughness 2.37 MPa m0.5; tensile energy absorption 1450 J/m². Composition powder in %: impact-resistant modified PMMA copolymer; PMMA copolymer; polymethyl methacrylate 97.8; plasticizer 1.5; initiator 0.6; pigments 0.1. Composition liquid in %: methyl methacrylate 95.9; dimethacrylate (linker) 4.0; catalyst < 0.1. High impact kit 20: 20 pre-dosed capsules; 22 funnels; 22 pre-formed wax patterns; 22 ventilation filters; 60 ml Separating Fluid alginate separating agent and 1 spatula. 1 set 021.262 pink , 021.272 pink-V , 021.282 pink-V Implant , 021.292 preference , 021.302 preference Implant , 021.312 34-V , 3shade guide each 021.370 , * This item is not available in all countries. Please contact your customer service expert.
RkJQdWJsaXNoZXIy MTI3MDM=