1 2 4 9 10 11 12 5 6 7 8 3 1-3SAMAxiopinModel System Parallel stepped pin system, plastic sleeves yellow, for 1.6 mm drills, pin attachment with instant adhesive. Starter kit: 200 stepped pins; 200 plastic sleeves yellow and 1 drill. 1 set 111.322 MSF 520K , 1 Axiopin Pins With plastic sleeves. In Axiobox. 1000 pcs. 1 pack. 111.302 MSF 510 , 2Axiopin Pins With plastic sleeves. 1000 pcs. 1 pack. 111.530 MSF 509 , 3Axiopin Drill For stepped and conical pin. Head ø 1.6 mm, shank ø 3.0 mm. 3 pcs. 1 pack. 111.332 MSF 503 , 4Coltène/Whaledent PX 112 S Pins Brass pins, medium, 16 mm. With plastic sleeves, black. The sleeves adjust to the diameter of the pins. 1000 pcs. 1 pack. 112.072 , 5Coltène/Whaledent PX 114 S Pins Brass pins, long, 20 mm. With plastic sleeves, black. The sleeves adjust to the diameter of the pins. 1000 pcs. 1 pack. 111.612 , 6Coltène/Whaledent PX 115 Pins Brass pins, short, 10 mm. With plastic sleeves, grey. 1000 pcs. 1 pack. 111.702 , 7Coltène/Whaledent PX 144 Pins Self-articulating. With plastic sleeves, white. 1000 pcs. 1 pack. 111.902 , 8Coltène/Whaledent Pindex Drill Head ø 2.0 mm, shank ø 3.0 mm. each 112.102 , 9-12CrosspinModel System Brass pins with cross-shaped profile and plastic sleeves. Base model former made of plastic. Pins available in two lengths. Advantages: • Only one dowel pin per die or segment without any loss of fitting accuracy or reproduction; • Dies can always be fixed exactly into the starting position; • Considerable saving of plaster; • Result is also a thinner model easy to mount into the articulator; • Reduction of time and energy while trimming the model; • Cross-shaped profile prevents rotation around the longitudinal axis of the pin; • Conic pin tips facilitate the resetting of the die into the sleeve in the model base; • Tough, affordable plastic base model moulds. Technical data pins NL: pin ø 2.5 mm; pin length 13 mm, 10 mm parallel, 3 mm conical; head length 5 mm; head ø 2 mm. Technical data pins XL: pin ø 2.5 mm; pin length 16 mm, 11 mm parallel, 5 mm conical; head length 5 mm; head ø 2 mm. 9Intro pack: 250 pins NL and sleeves; 1 drill and 2 base model moulds. 1 set 111.009 , 10+11 Refill pack: 1000 pins and sleeves. 1 pack. 111.019 NL , 111.029 XL , 12 Drill, head ø 2.0 mm, shank ø 3 mm; drilling depth approx. 7 mm each 111.039 , MODEL CREATION
RkJQdWJsaXNoZXIy MTI3MDM=