www.laboshop.com 1 2 3 4 5 1FINOBLOC Block-Out Material For the blocking-out of undercuts, as spacer, for the filling of proximal spaces, for the set-up of impressions when casting. transparent, 114 g each 215.108 , 2FINO BASEPLATE Base Plates Thermoplastic shellac plates to produce bases for wax-ups and bite registrations as well as individual trays. Thickness 1.35 to 1.40 mm. Pink. Advantages: • Dimensionally stable, e.g. during intraoral try-in; • Very break-resistant; • Easy processing. upper jaw, 100 pcs. 1 pack. 301.256 , lower jaw, 100 pcs. 1 pack. 301.266 , 3Speiko Base Plates Crystal clear resin plates to produce plates and individual trays. upper jaw 1 pack. 301.026 1 mm, 100 pcs. , 301.036 2 mm, 50 pcs. , lower jaw 1 pack. 301.046 1 mm, 100 pcs. , 4FINO Rolling Set Wooden roller and rolling board. Facilitates the manufacturing of individual impression trays. Due to the elevated borders of the rolling board, two layer thicknesses of 2 mm or 3 mm can be rolled out. 1 set 150.169 , 5FINOTRAY Tray Material Cold-curing. To produce individual impression trays, base plates for bite registrations and set-ups. Comfortable to process and does not stick after mixing. Impression trays made from FINOTRAY are rigid, torsion-free and can be easily trimmed without smearing. Minimum shrinkage. Physical data: mixing ratio 25 g : 10 ml; mixing time 1 min; soaking time 1 min; processing time 5-9 min; hardening time 9-13 min. powder, green each 150.509 1000 g , liquid each 150.549 750 ml ,
RkJQdWJsaXNoZXIy MTI3MDM=