www.laboshop.com 1 2 1 Ivoclar Vivadent Programat EP 3010 Firing and Pressing Furnace* With colour touch display and membrane keypad. Besides the already installed Ivoclar Vivadent programs, 300 individual firing programs and 20 individual press programs are available. Advantages: • Fully automatic press function (FPF) for optimal press results; • QTK2 heating muffle with SiC base reflector for a homogeneous heat distribution and outstanding firing and press results; • Electronic press drive with force sensor for a precise control of the press plunger in the micrometer range. Compressed air connection is not required; • Crack detection system (CDS) immediately interrupts the press process in case of a crack in the muffle; • Optical status display (OSD) informs about the actual operational status by using different colours; • The automatic temperature calibration (ATK2) using two reference points enables a very accurate calibration; • Energy-saving technology for up to 40 % less power consumption in standby mode; • Easy software updates with USB stick; • Remote maintenance via data file for an optimum support by a service centre. Technical data: 32.0 x 46.5 x 55.0 cm without object tray, 39.0 x 46.5 x 55.0 cm with object tray; 200-240 V, 50/60 Hz; power input max. 8 A; firing temperature max. 1200 °C; firing chamber ø 90 mm, height 80 mm; 18.3 kg; white. Delivery includes: Programat EP 3010 complete with power cable; vacuum hose; tray S for fired objects; SiC storage tray; tongs support; mould cooling grit; Programat firing tray kit 2; automatic temperature control set ATK2 (sample for testing); Programat USB stick; USB cable; Programat WLAN kit; display cleaning cloth and spare fuses. each 219.510 . , 2Ivoclar Vivadent Programat EP 5010 Firing and Pressing Furnace* With large 7 inch colour touch screen and membrane keyboard. An integrated thermographic camera automatically identifies the size of the inserted press flask, controls the temperature and adjusts the pressing process if required or warns if the press flask is too cold. If the unit is used as a firing furnace, the camera automatically controls the closing and pre-drying process. Apart from the already installed Ivoclar Vivadent programs another 500 individual programs and 20 press programs are available. Advantages: • Fully automatic press function (FPF) for optimal press results; • Programat infrared technology for more comfort, process safety and efficiency; • QTK2 heating muffle with SiC base reflector for a homogenous heat distribution and outstanding press and firing results; • Electronic press drive with force sensor for a precise control of the press plunger in the micrometre range. Compressed air connection is not required; • Crack detection system (CDS) immediately interrupts the press process in case of a crack in the muffle; • Optical status display (OSD) informs about the actual operational status using different colours; • The automatic temperature calibration (ATK2) using two reference points enables a very accurate calibration; • Energy-saving technology for up to 40 % less power consumption in standby mode; • Multimedia functions like videos, MP3 and pictures; • Easy software updates with USB stick or WLAN; • Remote maintenance via data file for an optimum support by a service centre; • USB and Ethernet interface, SD card reader. Technical data: 32.0 x 49.5 x 55.0 cm without object tray, 39.0 x 49.5 x 55.0 cm with object tray; 200-240 V, 50/60 Hz; power input max. 8 A; firing temperature max. 1200 °C; firing chamber ø 90 mm, height 80 mm; 20.5 kg; white. Delivery includes: Programat EP 5010 complete with power cable; vacuum hose; tray L for fired objects; SiC storage tray; tongs support; mould cooling grit; Programat firing tray kit 2; automatic temperature control set ATK2 (sample for testing); Programat USB stick; USB cable; Programat WLAN kit; display cleaning cloth and spare fuses. each 219.520 . , * This item is not available in all countries. Please contact your customer service expert.
RkJQdWJsaXNoZXIy MTI3MDM=