1 2 3 4 5 6 7 Find the complete range of products as well as all novelties and attractive offers online at www.laboshop.com. MODEL CREATION 1 FINOPONT Model Material On the basis of polyurethane, with filler. To produce precision models in the complete crown and bridge technique. Do not use with alginates. Advantages: • Smoothly flowing; • Dimensionally stable; • Edge-stable and abrasion-resistant; • Easy to grind and to saw; • Neutral smell. Physical data: mixing time approx. 30 s; flowing time approx. 2 min; setting time 1 h. Delivery includes: 2 x 100 ml base; 100 ml hardener; 400 g filler; 3 measuring cups; 1 dosing spoon and 10 mixing spatulas. 1 set 190.122 ivory-coloured , 190.132 apricot , 2FINOPONT SEPARATOR Separating Agent Easy to apply due to pump spray bottle. Separates FINOPONT against polyether impression resp. duplicating materials. 100 ml each 190.149 , 3Dental Kiefer Poly Plus 2000 S Model Material On the basis of polyurethane. For precision models and dies. Particularly suitable to produce inlays, implants and galvanised secondary parts. In case of impression materials like polyether or polysulfide, Break Agent separating spray must be used. Beige. Advantages: • Shrinkage of material almost not measurable; • Considerably temperature-resistant; • Excellent sawing and milling properties; • Stain pigments for arbitrary colouring. Physical data: processing time approx. 2-3 min; further processing after approx. 1 h; shrinkage approx. 0.04 %. Mixing ratio: base : hardener = 1 : 1. Complete set, 500 g: 250 g each components A and B; 2 dosing bottles; 1 spatula and 1 mixing bowl. 1 set 120.208 , Complete set, 1000 g: 2 x 250 g each components A and B; 2 dosing bottles; 1 spatula and 1 mixing bowl. 1 set 120.218 , 4 Break Agent separating spray each 120.232 400 ml , 5 stain pigments, 10 ml each 120.242 black , 120.252 red , 120.262 blue , 120.272 green , 120.282 yellow , 6DreveModralit 3K Model Material On the basis of polyurethane, to produce precision models with dimensionally stable reproduction of shoulder preparations. After one hour, Modralit 3K is already cured far enough for the sawing, drilling and trimming of the tooth arch. The surface can be coated with common die spacers and varnishes. Ivory-coloured. Physical data: processing time approx. 2 min; polymerisation time approx. 4-5 min; further processing after approx. 1 h; shrinkage approx. 0.067 %; flexural strength approx. 50 N/mm²; modulus of elasticity approx. 2500 N/mm²; impact resistance approx. 5.7 kJ/m². Mixing ratio: base : hardener = 2 : 1 + 1 measuring spoon filler. Delivery includes: 2 x 100 ml base; 100 ml hardener; 400 g filler; mixing and dosing aids. 1 set 021.502 , 7 Separator, 50 ml each 021.578 ,
RkJQdWJsaXNoZXIy MTI3MDM=