1 2 3 1+2FINOCAMMilling Unit Five-axis, simultaneously working. For the dry and wet processing. For crowns, bridges, fully anatomic crowns and bridges, inlays, onlays, veneers, abutments, telescopic crowns, partial denture frame designs, occlusal splints, implant bars etc. made of ZrO2 , CoCr, glass ceramic, nano-materials, resin as well as wax. With precision mounted IMT spherical work gear spindle. Working chamber with illumination. The control electronics ensures the accurate and simultaneous activation of all five axes. The machine base consists of one single, massive cast part. Thus, an extreme stability is created with a simultaneous reduction of vibrations. With the completely pre-configured tablet PC the unit can immediately be started after setting up without further installation. Wet grinding option by using an external pump for the processing of glass ceramic is pre-set. Advantages: • IMT spindle with cone cleaning and 4-fold hybrid ceramic ball bearings, effective output 300 W at constant load; • Precision mounting of the spindle axis for a first-class surface finish of the objects; • High accuracy due to automatic axis alignment and compensation; • High-grade automation due to automatic tool changer for up to 16 tools; • High concentricity and highly precise due to micro-step operation; • With the standardised STL format three-dimensional data sets from any CAD program can be imported; • Standard pressure sensor for the control of the required low pressure in the work chamber; • Low space requirements. Following CAD/CAM blanks with step can be processed: ZrO2 : height 10 to 30 mm, CoCr: height 10 to 18 mm, wax/resin: height 10 to 30 mm, nano-materials: height 10 to 30 mm. Technical data milling unit: 90-240 V, 50/60 Hz, 300 VA; X, Y, Z linear axes with 4 mm pitch, traversing range 140 x 98 x 76 mm; turning axis 360°, with clearance-free harmonic drive gear; B axis with angle of inclination of up to ± 30°; motor release < 1 µm; repeat accuracy ± 3 µm; synchronic spindle SFS 300P with chuck ø 3.0 mm, 170 W, 60,000 1/min, concentricity deviation < 1 µm. Technical data tablet PC: Intel®Core i5 processor; 128 GB/Go, 4 GB/Go RAM; Windows®10 Pro; support WLAN (802,11a/b/g/n/ac); Bluetooth®v.4.0; software pack FINOCAM (German, English, Spanish, French, Italian) pre-installed and set up. 1 Model CA Technical data: 49.0 x 44.5 x 54.0 cm; manual blank changer; 75 kg. Delivery includes: FINOCAM CA complete with FINOCAM Surface Pro 4 tablet PC including stylus and CAM software; 1 fixed clamping device for round CAD/CAM blanks with ø 98 mm. each 062.44DE0 . , 2Model CA + Technical data: 69.2 x 44.5 x 54.0 cm; automatic blank changer for up to 8 milling blanks; 95 kg. Delivery includes: FINOCAM CA + complete with FINOCAM Surface Pro 4 tablet PC including stylus and CAM software; 1 fixed clamping device for round CAD/CAM blanks with ø 98 mm. each 062.45DE0 . , 3FINOCAMWet GrindingModule For wet processing of materials like glass ceramic in FINOCAM CA and FINOCAM CA + milling units. The tool is optimally cooled with jets mounted on the spindle. Delivery includes: FINOCAM wet grinding module complete with pump station; inlet and drain hoses; object holder for four glass ceramic blocks and software supplement. each 062.362 . , CAD/CAM
RkJQdWJsaXNoZXIy MTI3MDM=