1 3 4 2 Great value - low cost. MODEL CREATION 1 FINOHIT Alabaster Plaster Type II. Fast setting. To produce moulds, planning and diagnostic models and anatomic casts. With 20 % model hard plaster portion. Physical data: processing time 5-6 min; setting time 10-12 min; setting expansion after 2 h 0.10 %; compressive strength after 1 h 12 N/mm², after 24 h 17 N/mm². 25 kg each FH-1000/9 natural white , Trial pack, 1000 g each FH-1000P/5 natural white , 2FINOHIT Model Hard Plaster Type III. To produce repair and counter bite models as well as planning models. Also suitable for investment in prosthetics. Physical data: processing time 5-6 min; setting time 10-12 min; setting expansion after 2 h 0.17 %; compressive strength after 1 h 23 N/mm², after 24 h 50 N/mm². 25 kg each FH-1001/6 yellow , FH-1002/6 blue , Trial pack, 1000 g each FH-1001P/4 yellow , FH-1002P/4 blue , 3FINOHIT Orthodontic Hard Plaster Type III. For anatomic casts and control models in orthodontic techniques. Also suitable for counter bite and repair models. Physical data: processing time 6 min; setting time 10-12 min; setting expansion after 2 h 0.14 %; compressive strength after 1 h 25 N/mm², after 24 h 60 N/mm². 25 kg each FH-1003/2 white , Trial pack, 1000 g each FH-1003P/2 white , 4FINOHIT Super Hard Plaster Type IV. Low viscous and thixotropic. To produce high-quality works (implant technique, tooth arch and master models). Physical data: processing time 6-7 min; setting time 12-14 min; setting expansion after 2 h 0.09 %; compressive strength after 1 h 60 N/mm², after 24 h 90 N/mm². 25 kg each FH-1005/2 golden brown , Trial pack, 1000 g each FH-1005P/9 golden brown ,
RkJQdWJsaXNoZXIy MTI3MDM=