www.laboshop.com 1 2 3 4 1 FINOROCK Super Hard Plaster Type IV. Synthetic. To produce tooth arches and single dies. For control models in the precious metal technique as well as for producing master casts in the crown and bridge technique and for master casts in partial denture (model casting). Advantages: • High breaking resistance; • High edge stability; • Low expansion; • Smooth surfaces. Physical data: processing time 4.5 min; setting time 9 min; setting expansion after 2 h 0.10 %; compressive strength after 1 h 55 N/mm², after 24 h > 60 N/mm². yellowish brown each 100.358 5 kg , 100.362 25 kg , Trial pack, 1000 g each 100.35P2 yellowish brown , 2FINOSTONE Super Hard Plaster Type IV. Synthetic. To produce master casts and working models in the crown and bridge technique. Can also be applied in the partial denture and galvano technique. Advantages: • Smooth, scratch-resistant surfaces; • Very high edge stability; • Excellent breaking resistance; • Low expansion; • Low viscous consistency. Physical data: processing time 5 min; setting time 10 min; setting expansion after 2 h 0.10 %; compressive strength after 1 h 45 N/mm², after 24 h 50 N/mm². white each 100.378 5 kg , 100.386 20 kg , Trial pack, 1000 g each 100.37P9 white , 3FINO SCAN STONE Super Hard Plaster Type IV. With this special plaster for the CAD/CAM technique, a pre-treatment (e.g. powdering) of the plaster model is no longer necessary. Suitable for all scanning systems. Advantages: • Prevents irritating reflexions; • High hardness and edge stability; • Very low expansion; • High scratch and breaking resistance; • Smooth model surface; • Short setting time. Physical data: processing time 4 min; setting time 7-9 min; setting expansion after 2 h 0.06 %; compressive strength after 1 h 60 N/mm², after 24 h 90 N/mm². 5 kg each 100.446 ivory , Trial pack, 1000 g each 100.44P3 ivory , 4FINO Base Plaster Type IV. Special plaster to produce tooth arches. Can be combined with all customary die and tooth arch plasters. Advantages: • Low viscosity; • Flows easily to pins and retentions; • Time saving; • Smooth surfaces; • Low expansion. Physical data: processing time 5-6 min; setting time 10-12 min; setting expansion after 2 h 0.06 %; compressive strength after 1 h 50 N/mm², after 24 h 70 N/mm². bucket, 10 kg each 100.126 natural white , 100.136 blue , sack, 25 kg each 100.162 natural white , 100.172 blue , Trial pack, 1000 g each 100.12P9 natural white ,
RkJQdWJsaXNoZXIy MTI3MDM=