1 2 3 6 5 4 CAD/CAM 1FINOSCAN Spray 1 Micro-pulverised, can be applied directly to the preparation or indirectly to the plaster model. The sprayed area is covered with a delicate anti-reflex layer. The scan spray is universally applicable for all CAD/CAM systems and enables an exact optical scan quality. Grain size 1 to 50 µm. Advantages: • Very homogeneous spray characteristic due to special propellant; • Special spray nozzle for an easy and precise dosing; • High selectivity with detailed reproduction of edges and optimised adhesive properties; • Applicable intraorally as well as extraorally; • Precise dosage with micro-pulverised thin spray film and no clogging of the spray nozzle; • Very easy to remove with water or compressed air. net 50 ml (gross 75 ml) each 555.551 , 2FINOSCAN Spray 2 Micro-pulverised, for the indirect labside application. The exclusive special valve technology of the spray head creates an absolutely homogeneous and fine spray film on the object to be scanned. The scan spray is universally applicable for all CAD/CAM systems and supports an exact optical scan quality. Grain size 1 to 50 µm. Advantages: • Optimum spray characteristics due to a specific spray nozzle; • Precise dosage with micro-pulverised, thin spray film; • Very easy to remove with water or compressed air; • High definition with detailed edge reproduction and optimised adhesive properties. net 50 ml (gross 75 ml) each 555.569 , net 200 ml (gross 270 ml) each 555.586 , 3FINOHIT Scan Spray Powder spray to improve the optical properties of prepared models at the extraoral application in the CAD/CAM technique. Grain size 1 to 50 µm. Advantages: • Compatible with all CAD/CAM systems; • Excellent scanning properties; • Finely atomised spray; • Easy to remove. net 50 ml (gross 75 ml) each FH-6622/1 , 4Dreve BlueSpray Scan Spray Rich in contrast, for intra- and extraoral optical scans. Advantages: • Good visibility due to blue colour; • Excellently scannable; • Easy and controlled removal; • Very long spray nozzle. 50 ml each 551.896 , 5Renfert Scan Spray For the surface matting of CAD/CAM restorations. For extraoral application. Advantages: • Very thin layer application and homogeneous grain size; • Economical consumption because of high opacity; • Non-clog spray due to specific valve technology. Delivery includes: 200 ml scan spray complete with 2 spray heads. 1 set 551.872 , 6Vita Powder Scan Spray Blue coloured pigment suspension with mint aroma for the intra- and extraoral application. To produce an opto-electronic impression by surface matting at CAD/CAM restorations. Advantages: • High powder concentration; • Very short drying time; • Can be removed without residues. Delivery includes: 75 ml powder scan spray complete with 2 spraying cannulas. 1 set 199.428 ,
RkJQdWJsaXNoZXIy MTI3MDM=