1 2 3 4 5 6 7 9 8 FINISHING 1+2FINOGrinders For processing resin. Shank ø 2.35 mm. 1 Grain coarse. Brown. 2Grain fine. Blue. 3+4FINOGrinders Made of high-quality high-grade corundum. For the processing of metals and CoCr alloys. Shank ø 2.35 mm. 3Grain fine. Light brown. 4Grain coarse. Brown. 7FINO Diamond Grinder Abrasive trimmer for the processing of all ceramics, pressed ceramics and full ceramics as well as for ZrO2 . The special bonding of the natural diamond grain guarantees highest abrasive efficiency and a particularly long service life. Shank ø 2.35 mm. Advantages: • No heat development on the object; • Ideal for pre-contouring and finishing. 8FINO Diamond Grinder Ceramic bonding, with standard grain for abrasive processing of ceramics and metal. Very high stability and heat tolerance due to special high performance bonding. Particularly well suited for processing hybrid and silicate ceramics as well as non-precious metal alloys and titanium. Shank ø 2.35 mm. Advantages: • High edge stability; • No heat development on the object; • High abrasion with soft cut; • Wear-resistant. ISO ø 180 140 L in mm 3.5 3.0 670.799 670.889 each , , ISO ø 170 170 671.312 671.322 3 pcs. , , ISO ø 125 125 671.276 671.286 6 pcs. , , ISO ø 050 040 150 120 L in mm 13.0 11.0 3.0 7.0 670.701 670.711 670.726 670.736 each , , , , ISO ø 120 040 050 L in mm 2.5 11.0 13.0 670.331 670.341 670.353 each , , , 9FINO Diamond Grinder Sintered diamond with organic bonding for the surface treatment of all porcelains. Best suitable for the processing of ZrO2 and the removal of pressing sprues of all pressed ceramic systems. Shank ø 2.35 mm. Advantages: • No heat development on the object; • Cool, vibration-free cutting; • High abrasive efficiency. ISO ø 065 050 035 L in mm 13.0 12.5 10.5 670.636 670.646 670.656 12 pcs. , , , 670.602 670.612 670.622 100 pcs. , , , ISO ø 065 050 035 L in mm 13.0 12.5 10.5 670.536 670.546 670.556 12 pcs. , , , 670.502 670.512 670.522 100 pcs. , , , 5+6FINOGrinders Made of high-quality high-grade corundum with uniform grain and optimum bonding hardness. For fast abrasion with minimum working pressure and low heat development. Shank ø 2.35 mm. Advantages: • Vibration-free concentricity; • Long durability; • Very good cutting performance. 5For processing medium-hard metal and CoCr alloys. Pink. 6For processing precious metal alloys. Brown.
RkJQdWJsaXNoZXIy MTI3MDM=