www.laboshop.com 5 1 2 3 4 NEW 1 Shofu Resin Glaze Primer Bonding Agent For Resin Glaze Liquid surface sealing material. Strengthens the bond to acrylic teeth, acrylic-based denture base materials, indirect composites, PMMA and hybrid ceramic materials for CAD/CAM as well as temporary materials. 6 ml each 028.628 , 2Shofu Resin Glaze Liquid Surface Sealing Light-curing. For the temporary sealing of resin teeth, acryl-based denture base materials, indirect composites, PMMA and hybrid ceramic materials for CAD/CAM as well as temporary materials. 6 ml each 028.632 , 3ShofuMZ Primer Plus Bonding Agent For a safe and durable bond of metal, ZrO2 , Al2 O3 with composite and resin. Advantages: • Strong bond without retention beads; • For all dental alloys and frameworks based on zirconium; • Intra- and extraoral application; • Easy and quick handling without additional equipment; • Transparent, no dark margins in the bonding area; • Excellent bond with the light-curing paste opaques of the Shofu universal opaque system. 5 ml each 015.298 , 4Shofu HC Primer Bonding Agent For all hybrid ceramic CAD/CAM restorations. Infiltrates the polymer matrix and thus creates a strong micromechanical retention between primer and restoration. For the safe adhesive bond to restorations made of Shofu Block HC and Disk HC. A dual-curing composite cement such as e.g. Shofu ResiCem is recommended for the adhesive cementation. Advantages: • Pre-treatment of the bonding surfaces of CAD/CAM restorations; • Durable strong bond to hybrid ceramic and composite; • Optimal wettability; • Universally applicable; • Quick handling – apply, air-dry, light-cure. 5 ml each 015.282 , 5Kulzer HiLite power 3D Light-Curing Unit For the polymerization of light-curing composites and 3D printing materials. Selection between six different lighting times with 6, 90 and 180 seconds for composites and 5, 10 and 15 minutes for 3D printing materials. Advantages: • Durable high-energy flash lamp with constant power output; • Large light spectrum; • Short polymerisation times; • Efficient heat management; • Safety door locking mechanism. Technical data: 22.5 x 34.5 x 23.0 cm; 110/115/230 V, 50/60 Hz; power consumption 325 VA; Xenon stroboscope flash lamp, flash frequency 20 Hz, power 200 W; optical wavelength 390-540 nm; protection class I; approx. 9.5 kg. Delivery includes: HiLite power 3D complete with lamp module with flash lamp and chip card; filter disc; pot-shaped reflector; power cable; object holder and 2 model trays. each 010.946 . , Object Clamp With magnetic holder. each 022.61,28 ,
RkJQdWJsaXNoZXIy MTI3MDM=