www.laboshop.com 7 8 1 2 3 4 5 6 More than 96 %of all items immediately available. 1-3FINO DIAMONDS FG ZIRCONIA Diamond Grinder For removing interfering contacts on sintered ZrO2 ceramic materials. Up to three times higher durability as well as an especially smooth grinding pattern due to multiple diamond layers and a special coating. Optimal operating speed is 150,000 rpm. Ceramics are processed with the laboratory turbine using water cooling. Shank ø 1.6 mm. • Green ring: coarse • Blue ring: standard • Red ring: fine • Yellow ring: super fine • White ring: ultra fine 1 For individual processing of sintered ZrO2 ceramic frames and ceramic connections. 20° diamond cutter in standard grain and three fine gradations. 32° conic diamond cutter in standard grain and three fine gradations. 7FINO DIADISC FGDiamond Disc Stable, suitable for the processing of ZrO2 . Double-sided rim coating with fine grain. Shank ø 1.6 mm. thickness 0.17 mm each 666.609 ISO ø 080 , ISO ø 012 014 666.229 666.239 5 pcs. , , ISO ø 008 012 012 014 016 666.279 666.199 666.289 666.259 666.296 5 pcs. , , , , , ISO ø 012 014 016 020 012 014 666.336 666.346 666.476 666.306 666.316 666.326 each , , , , , , ISO ø 023 016 018 666.539 666.549 666.559 each , , , ISO ø 010 010 010 010 666.359 666.389 666.499 666.509 each , , , , ISO ø 023 023 023 023 666.419 666.449 666.519 666.529 each , , , , 4+5FINO DIAMONDS FG Diamond Grinders Multi-layer. For the processing of ceramic materials and sintered ZrO2 with a laboratory turbine using water cooling. The diamonds are distinguished by a strong bond between the grain and the stainless metal. Thus the chipping off of individual diamond grains is reduced, which also increases the durability on hard ZrO2 . 4Grain coarse. For the reduction of ceramic materials. 5Grain standard. For the material- saving processing of sintered ceramic materials like e.g. ZrO2 to avoid micro cracks and chipping. 6FINO TC FG Cutter Specifically for the processing of hard materials like titanium and non-precious alloys with the laboratory turbine. The special cutting tip geometry accounts for best cutting performance. Cross-cut toothing. Shank ø 1.6 mm. Advantages: • Very fast cutting; • Break-proof due to one-piece manufacturing; • High concentricity; • Long service life. 8FINO DIADISC FG Sintered Diamond Disc Rigid, for the universal cutting and grinding of metal, ceramic and veneer materials. Particularly durable due to sintered diamonds. Double-side full coating with standard grain. Shank ø 1.6 mm. thickness 0.4 mm each 666.619 ISO ø 080 ,
RkJQdWJsaXNoZXIy MTI3MDM=