9 10 6 7 7 8 2 3 4 5 1 FINISHING ISO ø 023 606.011 2 pcs. , 1FINO CarbideMilling Cutter For time-saving and effortless cutting of plasters and resins. Recommended speed: 10,000-15,000 1/min. 2FINO RivetingWheel Suitable for the correction of protruding crown margins, the polishing of porous castings and the riveting of artificial teeth. Recommended speed range: 3,000-5,000 1/min. 3FINO TC PointedMilling Cutter For the cutting of deep-drawing foils. With wound toothing, for soft resins. Shank ø 2.35 mm. 4FINO TRICUTTER PointedMilling Cutter Three-blade rotary instrument. Precise cutting of soft resins and shellac. Length of cutting area 10 mm. Recommended speed range: 5,000-15,000 1/min. 5Busch TC PointedMilling Cutters Tetragonal. For working on deep-drawing foils. Shank ø 2.35 mm. 6Erkodent PointedMilling Cutters Tetragonal. For the processing of hard deep-drawing foils. Shank ø 2.35 mm. 7Erkodent HSS Spiral Drills For cutting hard and semi-hard deepdrawing foils. Shank ø 2.35 mm. 8FINOWax Scraper Made of tempered stainless steel. Shank short ø 2.35 mm. 9Hager &Meisinger Repair Milling Cutters For the roughening of acrylic teeth and dentures. Shank ø 2.35 mm. 10Jota Twist Drills Made of steel. Shank ø 2.35 mm. Delivery includes: one peace each cylinder wide; cylinder thin and flame. 1 set 637.856 , Angle 0° 2° 4° 6° 602.113 602.123 602.133 602.143 each , , , , Fig. 203 203 203 203 ISO ø 005 007 010 012 L in mm 7.0 7.0 9.0 9.0 672.423 672.433 672.443 672.453 10 pcs. , , , , Cylinder, Cylinder, Flame wide thin 637.872 637.882 637.892 each , , , Fig. 108 ISO ø 060 L in mm 3.7 634.529 2 pcs. , ISO ø 021 641.706 each , ISO ø 023 106.791 each , ISO ø 080 100 643.106 643.116 each , , ISO ø 023 641.646 3 pcs. , ISO ø 010 106.582 3 pcs. , ISO ø 014 106.726 5 pcs. , For the roughening of acrylic teeth and dentures.
RkJQdWJsaXNoZXIy MTI3MDM=