www.laboshop.com 6 5 3 4 1 2 1-4Edenta Volcano TCMilling Cutter DLC-tempered, for high requirements and a long service life. The substance DLC is diffused into the tungsten carbide structure to a penetration depth of 90 µm. Thereby a micro-smooth surface is created. The very sharp cutter edges guarantee a particularly high cutting efficiency and additionally a high durability. The smooth surface reduces friction. For an optimised cutting performance and very calm tool rotation. Shank ø 2.35 mm. Fig. 251 ISO ø 060 L in mm 14.0 621.009 each , Fig. 73 79 79 138 251 251 257 261 ISO ø 014 040 045 010 060 060 023 023 L in mm 3.0 14.0 13.0 4.0 14.0 14.0 17.0 14.0 621.016 621.026 621.036 621.209 621.049 621.056 621.066 621.079 each , , , , , , , , Fig. 79 ISO ø 040 L in mm 13.5 621.136 each , Fig. 73 79 79 251 261 ISO ø 014 040 045 060 023 L in mm 3.0 14.0 13.0 14.0 14.0 621.086 621.096 621.106 621.116 621.126 each , , , , , Fig. 82 85 85 85 ISO ø 050 050 060 080 637.511 637.711 637.731 637.749 each , , , , Fig. 75 75 77 ISO ø 050 080 070 L in mm 9.5 14.0 12.0 672.473 672.489 672.499 5 pcs. , , , Cross toothing, coarse - 50 For the aggressive removal of all resins, also tray materials, and for the processing of plaster. Cross toothing, standard - 10 For the processing of non-precious and partial denture alloys and for the coarse abrasion of all dental materials without tearing the surface. Cross toothing, fine - 20 Suitable for all dental materials. Smoothes the surface and enables a dedicated contouring of every structure. Spiral toothing, fine - 24 For an especially fine cutting structure on all alloys. Highly recommended for titanium because the special toothing prevents a clogging of the cutter. 5Busch Steel Milling Cutter For finishing soft relining materials such as Molloplast B and Mollosil. The special toothing allows to work quickly, problem-free and accurately. Shank ø 2.35 mm. 6Jota Steel Milling Cutters For resins. Shank ø 2.35 mm.
RkJQdWJsaXNoZXIy MTI3MDM=