5 4 3 1 2 FINISHING 1-5Edenta TCMilling Cutter Shank ø 2.35 mm. 1Cross toothing, fine - 20 Suitable for all dental materials. Smoothes the surface and allows selective finishing of every structure. 2Spiral toothing, fine - 24 For a special surface structure on all alloys. Very recommendable for titanium as the special toothing prevents the clogging of the milling cutter. 3Titanium toothing, fine - 27 For the processing of non-precious metal alloys. Very effective cutting. For a high removal of material with simultaneous smoothing of the surfaces. 4Safety toothing - 86 For plaster. The anti-clockwise toothing pushes the instrument into the chuck. The additional phase cut guarantees a smooth instrument rotation and optimally processed surfaces. 5Cross toothing, transversal cut - 65 For the processing of PMMA materials. Fast material removal with a sharp cut without heating up the material. The special toothing does not clog and results in smooth surfaces which can easily be finished afterwards. Fig. 79 129 251 257 261 ISO ø 040 023 060 023 023 L in mm 13.5 9.0 14.0 10.5 10.5 610.649 610.622 610.659 610.602 610.612 each , , , , , Fig. 71 79 251 261 295 ISO ø 023 045 060 023 023 L in mm 2.0 13.0 14.0 14.0 16.0 610.729 610.731 610.741 610.709 610.719 each , , , , , Fig. 73 79 129 138 139 251 251 ISO ø 014 040 023 023 023 040 060 L in mm 3.0 13.5 8.0 8.0 8.0 11.5 14.0 650.992 621.149 621.156 621.169 621.179 621.189 621.199 each , , , , , , , Fig. 73 77 79 129 138 139 251 261 ISO ø 014 023 045 023 023 023 060 023 L in mm 3.0 5.0 13.0 8.0 8.0 8.0 14.0 14.0 650.166 650.176 650.186 650.196 650.206 650.216 650.241 650.226 each , , , , , , , , Fig. 72 251 351 ISO ø 060 060 070 L in mm 13.0 14.0 14.0 651.002 651.012 651.022 each , , ,
RkJQdWJsaXNoZXIy MTI3MDM=