www.laboshop.com 3 3 3 1 2 1-3Edenta TCMilling Cutter Shank ø 2.35 mm. 1Cross toothing, coarse - 50 For aggressive removal of all resins, also for tray materials and for processing plaster. 2Cross toothing, fine coarse - 53 Especially for processing denture resins. 3Cross toothing, standard - 10 For processing non-precious metal and partial denture alloys and for gross removal of all dental materials without tearing of the surface. Fig. 79 251 351 ISO ø 060 060 060 L in mm 15.0 14.0 12.0 610.439 610.479 610.459 each , , , Fig. 77 79 251 ISO ø 060 040 060 L in mm 11.0 13.5 14.0 610.516 610.526 610.536 each , , , Fig. 71 71 71 71 71 71 73 73 ISO ø 010 014 023 027 031 040 014 023 L in mm 0.8 1.2 2.0 2.4 2.8 3.5 3.0 4.0 610.331 610.341 610.351 610.369 610.379 610.389 610.161 610.091 each , , , , , , , , Fig. 137 138 138 139 251 251 257 261 351 364R ISO ø 023 010 023 023 060 060 023 023 040 023 L in mm 5.5 4.0 8.0 8.0 14.0 14.0 17.0 14.0 8.0 16.0 610.101 610.146 610.061 610.071 610.329 610.279 610.059 610.009 610.239 610.019 each , , , , , , , , , , Fig. 73 77 77 77 78 78 79 79 79 88 ISO ø 060 029 060 060 040 060 031 045 060 023 L in mm 9.5 5.0 11.0 12.0 9.0 12.0 11.5 13.0 15.0 5.5 610.309 610.189 610.319 610.229 610.269 610.259 610.199 610.209 610.219 610.121 each , , , , , , , , , ,
RkJQdWJsaXNoZXIy MTI3MDM=