6 4 5 5 3 1 2 3 FINISHING 1-6Horico TCMilling Cutter Shank ø 2.35 mm. 1Transversal toothing, extra coarse For soft resins. 2Transversal toothing For resins, metal alloys and titanium. 3Transversal toothing, standard For metal alloys, resins and plaster. 4NE toothing For the fast removal of non-precious metal alloys. 5NEF toothing Creates a smooth surface on non- precious metal alloys. 6Transversal toothing, fine Effective cutting, for denture resins hard/soft, veneering porcelain, metal alloys and titanium. With pressure suitable for shaping, without pressure suitable for finishing. Fig. 274 Toothing 212 ISO ø 060 L in mm 14.0 624.071 each , Fig. 144 194 194 263 274 277 Toothing 137 137 137 137 137 137 ISO ø 060 040 070 060 060 040 L in mm 12.0 13.0 14.0 11.0 14.0 13.0 623.776 623.166 624.516 623.176 623.186 623.196 each , , , , , , Fig. 141 194 194 Toothing 134 134 134 ISO ø 023 023 040 L in mm 8.0 12.0 13.0 611.932 611.929 611.909 each , , , Fig. 194 198 198 198 200 237 274 277 277 277 289 289 Toothing 134 134 134 134 134 134 134 134 134 134 134 134 ISO ø 045 016 023 040 023 023 060 014 023 040 010 023 L in mm 13.0 8.0 8.0 9.0 15.0 6.0 14.0 3.0 4.5 13.0 8.0 8.0 624.521 612.351 611.952 622.521 611.989 611.962 611.919 611.972 624.552 624.561 612.341 611.942 each , , , , , , , , , , , , Fig. 141 194 244 277 289 Toothing NE NE NE NE NE ISO ø 023 040 014 040 023 L in mm 8.0 13.0 3.0 13.0 8.0 622.571 622.551 622.581 662.141 622.561 each , , , , , Fig. 194 194 274 Toothing 136 136 136 ISO ø 023 040 060 L in mm 12.0 13.0 14.0 622.871 622.882 622.891 each , , , Fig. 141 194 289 Toothing NEF NEF NEF ISO ø 023 040 023 L in mm 8.0 13.0 8.0 622.861 622.591 622.851 each , , , Fig. 277 Toothing NEF ISO ø 014 L in mm 3.0 662.161 5 pcs. ,
RkJQdWJsaXNoZXIy MTI3MDM=