8 9 10 11 12 13 14 FINISHING NEW 8Cross toothing, extra fine Delicate grinding pattern. For all alloys and composites. Also for ceramic as the special cut prevents fine surface cracks. 9Spiral toothing, standard Very smooth cutting pattern with simultaneously high material reduction on non-precious metal alloys. Only little final polishing required. Also excellently suitable for titanium. 10Spiral toothing, fine Particularly delicate grinding pattern. For precious and non-precious metal alloys as well as titanium. 11Spiral toothing, extra fine Smooth grinding surface pattern, no clogging of the cutter. Universally applicable for all dental materials. Also for titanium. Hint: only apply low operating pressure. 12-14FINO TCMilling Cutter Made from highly condensed tungsten carbide of ISO type K20 to K40. Specifically for processing PEEK and PEKK. Shank ø 2.35 mm. 12Cross toothing, standard With slim working part for an optimum cutting of the restoration from the blank. Recommended speed 25,000 1/min. 13Cross toothing, fine For smoothing and correcting interdental surfaces. Recommended speed 35,000 1/min. 14Transversal toothing, fine For grinding of the connection of the holding bar as well as for processing of larger areas. For a very efficient material abrasion and a smooth, fine surface appearance. Recommended speed 35,000 1/min. ISO ø 010 L in mm 4.2 606.676 each , ISO ø 040 L in mm 14.2 606.682 each , ISO ø 023 L in mm 11.5 606.692 each , ISO ø 023 023 023 023 023 029 045 603.396 603.406 603.416 603.426 603.436 603.486 603.492 each , , , , , , , ISO ø 023 023 014 023 040 040 060 603.906 603.916 603.962 603.926 603.936 603.946 603.956 each , , , , , , , ISO ø 060 040 023 023 023 602.879 602.859 602.826 602.846 602.866 each , , , , , ISO ø 060 040 023 008 603.106 603.116 603.146 603.162 each , , , ,
RkJQdWJsaXNoZXIy MTI3MDM=