1 2 3 4 5 6 NEW You will find 3D printers at www.laboshop.com. 1Scheu-Dental Imprimo LCModel Resin Light-curing, meth-acrylate-based build-up material for DLP systems. To produce models with smooth surfaces. Adjusted to 3D printers with 385 nm light source. Physical data: viscosity approx. 0.7 Pa s; density approx. 1.1 g/ml; hardness approx. 80 Shore D. 910 ml each 004.602 ivory , 2Scheu-Dental Imprimo LC Gingiva Resin Light-curing, meth-acrylate-based build-up material for DLP systems. To produce gingival masks. Adjusted to 3D printers with 385 nm light source. Physical data: viscosity approx. 2.5 Pa s; density approx. 1.1 g/ml; hardness approx. 60 Shore A. 910 ml each 004.992 pink , 3Scheu-Dental Imprimo LC Impression Resin Light-curing, meth-acrylate-based build-up material for DLP systems. To produce individual trays and base plates for bite registrations. Adjusted to 3D printers with 385 nm light source. Physical data: viscosity approx. 0.8 Pa s; density approx. 1.1 g/ml; hardness approx. 80 Shore D. 910 ml each 004.592 neon orange , 4Scheu-Dental Imprimo LC Cast Resin Light-curing, meth-acrylate-based build-up material for DLP systems. Burns without residues. To produce cast objects. Adjusted to 3D printers with 385 nm light source. Physical data: viscosity approx. 0.3 Pa s; density approx. 1.1 g/ml; hardness approx. 85 Shore D. 910 ml each 004.702 red , 5Scheu-Dental Imprimo LC Splint Resin Light-curing, meth-acrylate-based build-up material for DLP systems. To produce highly precise occlusal splints and drill templates. Relative flexibility when set. High wearing comfort, low risk of breakage and can be well polished. Without thinner monomers. Adjusted to 3D printers with 385 nm light source. Physical data: viscosity approx. 0.7 Pa s; density approx. 1.1 g/ml; hardness approx. 80 Shore D. 910 ml each 004.582 clear transparent , 6Scheu-Dental Imprimo LC IBT Resin Light-curing, meth-acrylate-based build-up material for DLP systems. To produce transfer templates for the indirect adhesive technique. Adjusted to 3D printers with 385 nm light source. Physical data: viscosity approx. 2.4 Pa s; density approx. 1.1 g/ml; hardness approx. 80 Shore A. 910 ml each 004.982 clear transparent , NOVELTIES
RkJQdWJsaXNoZXIy MTI3MDM=