1 2 3 4 5 6 1 Shofu Ceravety Press & Cast Investment Material* Universally applicable for the press, press-on and casting technique. For speed and conventional heating. Suitable for precious and non-precious metal alloys. In the press-on technique metal, ZrO2 or ceramic can be added during investment. Physical data: processing time approx. 6 min; setting time approx. 9 min; setting expansion 0.5 % with 40 % mixing liquid, 0.6 % with 60 % mixing liquid, 0.7 % with 80 % mixing liquid; 1.0 % with 100 % mixing liquid; thermal expansion 0.75 % with 40 % mixing liquid, 0.80 % with 60 % mixing liquid, 0.85 % with 80 % mixing liquid, 0.90 % with 100 % mixing liquid; compressive strength approx. 10.0 N/mm²; mixing ratio 100 g : 20 ml. powder 1 pack. 403.212 x g , 403.222 x g , mixing liquid each 403.232 ml , 403.242 ml , 2Hinrichs Hinrivest KB Investment Material For all precious and non-precious metal alloys in the crown, bridge as well as the double-crown and combination technique. Also best suitable for pressed all-ceramic and the direct firing of porcelain. Ultra-fine grain, high fitting accuracy and surface quality. Speed and conventional heating. Physical data: processing time 5-7 min; setting expansion > 2.00 %; mixing ratio 100 g : 25 ml. powder 1 pack. 403.606 x g , 403.612 x g , 3Hinrichs Hinrivest Liquid Expansion Liquid Mixing liquid for Hinrivest CoCr, Hinrivest SG, Hinrivest KB and Hinrivest Press. For the control of the setting expansion of phosphate-bonded investment materials. Can simply be diluted with distilled water. Attention: risk of frost below +4 °C. each 403.652 ml , 403.666 ml , 4Yeti Cobavest Investment Material Phosphate-bonded, for model casting. Speed and conventional heating. For gel or silicone duplication. Advantages: • High fitting accuracy; • Fine grained consistency; • Excellent flow properties; • Very smooth surfaces of the cast. Physical data: processing time 5 min; setting expansion 0.6-0.8 %; thermal expansion 1.1-1.3 %; mixing ratio 100 g : 21 ml. powder 1 pack. 404.102 x g , mixing liquid each 404.112 ml , Delivery includes: 100 x 200 g powder and 3000 ml mixing liquid. 1 pack. 404.122 , 5Morita Titavest CB Investment Material For crowns and bridges made of titanium. Optimum investment material for inlays up to combination work and implant suprastructures with exact reproduction of details. Very low surface reaction. Physical data: processing time approx. 20 min; setting expansion approx. -0.05 %; thermal expansion approx. 1.3 %; mixing ratio 100 g : 13.5 ml. powder 1 pack. 403.700 x g , 403.712 g , 6Morita Titavest Spinel Mixing Liquid For Titavest CB, ME and MZ investment material. The bond with Titavest powder builds up the spinel structure. each 403.758 ml , 403.762 ml , INVESTING · CASTING · SOLDERING * This item is not available in all countries. Please contact your customer service expert.
RkJQdWJsaXNoZXIy MTI3MDM=