www.laboshop.com 1 2 3 You will find more GC investment materials on page 393. 1 GCMultiPressVest Investment Material Graphite-free, phosphate-bonded, for pressable porcelains. Especially adjusted to the systems GC Initial IQ One, Press-over-Metal/Press-overZircon and GC Initial PC. Advantages: • Fine-grained, for plane pressings reproducing all details; • The creamy consistency guarantees a simple and exact investment; • Suitable for speed and conventional heating due to the high thermal stability. Physical data: at room temperature of 23 °C and 100 % mixing liquid: processing time approx. 5 min; setting expansion 0.75-1.50 %; thermal expansion 0.90-1.00 %; compressive strength approx. 5 N/mm²; mixing ration 100 g : 22 ml. powder 1 pack. 403.116 x g , mixing liquid each 403.126 ml , 2GC Fujivest Premium Investment Material Carbon-free, phosphate-bonded, for crowns and bridges. For all alloys, with focus on alloys without precious metals. For speed and conventional heating. Advantages: • Robust and resistant; • Controlled, reliable expansion; • Also suitable for the ringless technique; • High flowability. Physical data: at room temperature of 23 °C and 100 % mixing liquid: processing time 6 min; setting expansion 2.0-2.5 %; thermal expansion 1.0 %; compressive strength 7.5 N/mm²; mixing ratio 100 g : 22 ml. powder 1 pack. 404.312 x g , 404.338 x g , 404.322 x g , mixing liquid each 404.358 ml , 3GC Fujivest Platinum II Investment Material Carbon-free, phosphate-bonded, for crowns and bridges. For precious metal, semiprecious metal and Pdbased alloys. Speed and conventional heating. Advantages: • Optimal fit even at implant suprastructures and long-span bridges; • Easy to steer with an extended expansion range; • Longer processing time; • Very good flow properties; • Easy to devest; • Smooth surfaces, exact reproduction of all fine details. Physical data: at room temperature of 23 °C and 100 % mixing liquid: processing time approx. 6 min; setting expansion 0.7 % in the speed heating technique, 1.7 % in the gradual heating technique; thermal expansion 1.4 % in the speed heating technique, 0.8 % in the gradual heating technique; compressive strength 5 N/mm²; mixing ratio 100 g : 22 ml. Intro pack: 4 x 150 g powder; 135 ml mixing liquid; 1 measuring cup and 1 Casting Liner mould ring liner. 1 set 404.346 , powder 1 pack. 404.268 x g , 404.272 x g , 404.288 x g , mixing liquid each 404.298 ml ,
RkJQdWJsaXNoZXIy MTI3MDM=