www.laboshop.com 1 2 3 4 5 1 BegoWiroFast Investment Material Phosphate-bonded, for the partial denture technique. Speed and conventional heating. For gel and silicone duplicating technique. Advantages: • Excellent flow properties; • Particularly good duplicating characteristics in gel; • Mould can be placed in the pre-heating furnace already ten minutes after investing; • Optimum deflasking properties; • Very good fit and smooth cast surfaces. Physical data: processing time approx. 3 min; thermal expansion linear approx. 0.8 % with 70 % BegoSol; compressive strength approx. 11.9 N/mm²; mixing ratio 100 g : 20-21 ml. powder 1 pack. 404.242 45 x 400 g , 2BegoWirovest Investment Material Phosphate-bonded, for partial dentures, for gel or silicone duplication. Very high expansion and model hardness when used with BegoSol mixing liquid. Conventional heating. Physical data: processing time 2 min 45 s; thermal expansion linear 1.15 % with 40 % BegoSol; total expansion approx. 2.3 % with 40 % BegoSol; compressive strength approx. 15 N/mm²; mixing ratio 100 g : 15 ml. powder 1 pack. 402.510 x g , 402.548 x g , 3BegoWirovest plus Investment Material Graphite-free, phosphate-bonded, for partial dentures. Very good fitting accuracy even with different duplicating techniques and processing parameters. With prolonged processing time and universal duplicating possibility within all indications. Conventional heating. Physical data: processing time 3 min 15 s; thermal expansion linear 1.15 % with 40 % BegoSol; total expansion linear approx. 2.3 % with 40 % BegoSol; compressive strength approx. 15 N/mm²; mixing ratio 100 g : 15 ml. powder 1 pack. 402.572 45 x 400 g , 4BegoWiroplus S Investment Material Precision partial denture investment material for the silicone duplicating technique. For partial dentures with clasps and restorations with interlocks. Conventional heating. Advantages: • Smooth surfaces; • Very good fitting; • High edge stability; • Very good deflasking properties. Physical data: processing time approx. 3 min; thermal expansion linear approx. 1.2 % with 80 % BegoSol; total expansion linear approx. 2.3 % with 80 % BegoSol; compressive strength approx. 15 N/mm²; mixing ratio 100 g : 16 ml. powder 1 pack. 402.588 x g , 402.522 x g , 5BegoWiropaint plus Investment Material Fine investment for partial denture. Allows a very smooth surface of the cast and considerably reduces re-working. Almost no deposits and always ready for use. 200 ml each 404.010 ,
RkJQdWJsaXNoZXIy MTI3MDM=