3 2 1 4 MODELLING · DEEP-DRAWING 1 Yeti easy Waxer Wax Modelling Unit With light, pluggable and temperatureresistant modelling handpiece and LED display. Advantages: • Analogue technology for a fault-free and safe function; • Particularly short heating rate; • Extended temperature range up to 190 °C; • High work relief due to delicate temperature control and a fast reaction time of the probe; • Power-saving switch-on/off, no power consumption in stand-by mode; • Easy operation with temperature controller. Technical data: 230 V, 50/60 Hz; 9-12 W; max. 190 °C. easy Waxer Delivery includes: easy Waxer complete with 1 handpiece including connecting cable; 1 handpiece clamp and 1 modelling tip PKT 2. each 202.426 , 2FINO FLAMELESS Induction Heating Unit For the safe and soot-free heating of instruments without flame. A mobile and environmentally friendly alternative to the Bunsen burner. Advantages: • Fast heating; • Manual fine adjustment of the sensor sensitivity depending on the thickness of the modelling instrument; • Energy-efficient; • Ergonomic design. Technical data: 9.1 x 20.9 x 8.9 cm; 230 V, 50/60 Hz; 100 W; 530 g. Delivery includes: FINO FLAMELESS complete with 4 protective caps and power cable. each 203.101 , protective caps, 10 pcs. 1 pack. 203.159 , 3Amann Girrbach Noflame Plus Induction Heating Unit The smart and mobile alternative to a conventional Bunsen burner and the alcohol/gas burner. The heating is activated by a sensor switch responding to steel-containing objects. No more open flame and instruments as well as e.g. gutta-percha points stay free of soot particles. Advantages: • Heating-up time comparable to Bunsen burner; • Mobile and immediately ready for operation; • No changeover of handling necessary; • Coil opening for instruments; • Control LED for operating state; • Protective cap for the protection of the coil opening. Technical data: 8.5 x 19.5 x 8.3 cm; 230 V/50 Hz; 130 W; 600 g. Delivery includes: Noflame Plus complete with 2 protective caps and power cable. each 203.090 , Protective Caps For Noflame Plus. 10 pcs. 1 pack. 203.020 , 4Renfert Waxprofi Wax Warming Unit For the full and partial denture technique. For pre-heating of prosthetic waxes to the ideal processing temperature. Advantages: • Wax alternatively liquid or low viscous; • Ideal processing temperature, overheating of the wax is thus avoided; • Very low contraction of the prosthetic waxes; • High precision during denture set-up; • Time-saving; • Infinitely adjustable temperature control from 40 to 110 °C; • Large wax basin for melting of approx. four wax base plates and with wipe-off rim at the inner basin edge. Technical data: 17.8 x 12.0 x 5.4 cm; volume wax basin 120 ml; 230 V, 50/60 Hz; power consumption 120 W; temperature range 40 to 110 °C; power cable 2 m; 608 g. each 205.608 ,
RkJQdWJsaXNoZXIy MTI3MDM=